- Perfect for heat sensitive materials or rugged applications
- Lower noise due to belt-driven operation
- Achieve various particle sizes on one machine, simply by changing screen and/or impeller (spacers required)
- Various screens available to meet the demands of many different applications and processes
Features & Benefits
Stainless Steel Construction
316L contact parts
All seals FDA compliant (silicone, PTFE etc.)
ATEX / Ex-Proof
ATEX (ex-proof) versions available
The Hanningfield Uni-Mill B-Series (M10-B, M20-B, M30-B, M60-B) utilises the current industry standard over-driven conical mill design, featuring a belt-driven impeller, rotating inside a screen (60º inclusive screen angle). This principle achieves comminution by compression and shearing of the particles between the impeller and surface of the screen.
The Uni-Mill over-driven models are designed to be used with spacers, allowing customers to adjust and set the optimal gap between the screen and impeller for efficient milling (for spacer-less mills see Under-Driven Conical Mills). The Uni-Mill can be supplied with a wide-range of tooling to achieve the required final particle size and throughput. Conical mills are able to achieve size reduction as low as 150 microns (80 mesh) with minimal heat generation and are suitable for both dry and wet milling applications.
As standard, all contact parts are manufactured from 316L stainless steel (180 grit), with FDA compliant seals, gaskets etc. Non-contact parts such as frames, motor covers and control panels are manufactured from 304 stainless steel (150 grit). All standard materials of construction and surface finishes can be upgraded or downgraded upon request.
Various mounting solutions are available and the conical mill can be customised with a selection of inlet and outlet configurations including hand-feed chute, valve assemblies, tri-clover connections, vacuum adaptors or any other bespoke design required for process integration.
The Uni-Mill can also be modified with optional upgrade features including temperature monitoring, CIP, WIP, pre-breakers, nitrogen purging and ATEX execution where applicable. All equipment can be supplied with full validation documentation (FS/DS, FAT, SAT, IQ/OQ) and 3.1 mill certificates to EN10204.
In-Line Vacuum Milling
In-line vacuum transfer through an over-driven conical mill for achieving automated, dust-tight milling (same process can be achieved with an under-driven conical mill).
Choose a Model
The Hanningfield Uni-Mill M10-B is designed for low capacity production applications.
The Hanningfield Uni-Mill M20-B is designed for high capacity production applications.
The Hanningfield Uni-Mill M30-B is designed for very high capacity production applications.
The Hanningfield Uni-Mill M60-B is designed for the highest capacity production applications, typically milling bulk material.