Capture it. Recover it. Reuse it.
While we offer standard sizes of Powder Recovery Cyclones, there are some applications where the standard model does not suit a design specification and a bespoke design is required. On these occasions, we are able to engineer and manufacturer a solution to provide a cyclone with features tailored to a customer’s exact application.
For a recent project, we were asked by the customer to manufacture Type 30 and 50 cyclones which included a range of bespoke features. Included in the design were spray balls for Wet in Place (WIP) cleaning. The cyclones also featured butterfly valves with open and close position feedback sensors and a customised buffer hopper.
The photos from this project are shown below >>
About the Hanningfield Cyclone
The Uni-Dust cyclone intercepts waste powder before it reaches the dust extraction system. Typically, 90-99.9% of waste powders are collected and can be used for batch loss reconciliation or reintroduced to the process (where protocol permits).
Although designed for the recovery of waste powder from compression and encapsulation machines (e.g. tablet press, capsule filling machine), the Uni-Dust is proven to be equally effective in numerous other applications. This includes sachet filling, spray drying, inhalation and any other process where excess dust is extracted.
Where required, the cyclone can also incorporate a manifold for connection to ancillary equipment such as tablet dedusters or capsule polishers. For greater control over your process, the Uni-Dust cyclone can be modified to include various optional upgrade features including safe-change, level control or sight glass (in catchpot), isolation valve and air balancing valves.
All equipment can be supplied with full validation documentation (FS/DS, FAT, SAT, IQ/OQ) and 3.1 mill certificates to EN10204.
Video: Watch the Hanningfield Powder Recovery Cyclone in action >>
Get in Touch
If you would like to speak to one of our experts regarding our Powder Recovery Cyclones or you would like a quote for one of our products, send us a message using our Contact Form or call us on +44 (0)1702 549 777.
To keep up-to-date with the latest news from Hanningfield you can follow us on LinkedIn.