+44 (0) 1702 549777

10th January, 2018 No Comments Conical Mills, Milling and Sizing, Pharmaceutical

Pharmaceutical Sieve Mill | Conical Milling

A sieve mill provides the perfect solution to material size reduction in pharmaceutical manufacturing. It is used for reducing the size of dry material in production, de-lumping material post-drying, sizing wet material post-granulation (increasing surface area for quicker drying) and deagglomeration of clumped material, as well as for various other processes.

Besides pharmaceutical processing, the sieve mill is also suitable for use in other hygienic process environments, including biotech, nutraceutical, food, cosmetic and chemical manufacturing.

All mills are available with a wide-range of screen and impeller tooling, helping to achieve the various required final particle sizes and throughput. Conical mills are typically suitable for size reduction down to approximately 150 microns (80 mesh) with minimal heat, noise and dust generation. They are also suitable for both dry and wet milling applications.

Sieve milling is one of the most effective methods of particle size reduction, and customers can trial their products free of charge at our UK test facility.

 

Sieve Mill Models

The Uni-Mill U-Series (M05-U, M10-U, M20-U, M30-U) achieves a range of different throughputs and final particle sizes, so the equipment can be better matched to your exact requirements. Below is an overview of the available models.

Uni-Mill M05-U

The Uni-Mill M05-U is designed for laboratory and small scale applications. The unit features an 83mm diameter screen (3.25”), enabling throughputs up to ~200kgs/hr (425 lbs/hr).

It features an 8” feed chute with 6” outlet (note: inlet / outlet configuration can be modified to suit any application requirement). The unit is supplied with a 0.375kW motor set to a standard speed of 3600RPM (includes variable speed drive as standard).

Uni-Mill M10-U

The Uni-Mill M10-U is designed for pilot or low capacity applications. The unit features an 127mm diameter screen (5”), enabling throughputs up to ~400kgs/hr (850 lbs/hr).

It features a 10” feed chute with 8” outlet (note: inlet / outlet configuration can be modified to suit any application requirement). The unit is supplied with a 1.5kW motor set to a standard speed of 2440RPM (optional variable speed drive available).

Uni-Mill M20-U

The Uni-Mill M20-U is designed for a wide scope of production applications. The unit features an 203mm diameter screen (8”), enabling throughputs up to ~2000kgs/hr (4250 lbs/hr).

It features a 12” feed chute with 12” outlet (note: inlet / outlet configuration can be modified to suit any application requirement). The unit is supplied with a 4.0kW motor set to a standard speed of 1480RPM (optional variable speed drive available).

Uni-Mill M30-U

The Uni-Mill M30-U is designed for high capacity production applications. The unit features an 306mm diameter screen (12”), enabling throughputs up to ~4000kgs/hr (8800 lbs/hr).

It features a 12” feed chute with 500mm v-clamp connection on the outlet (note: inlet / outlet configuration can be modified to suit any application requirement). The unit is supplied with a 7.5kW motor set to a standard speed of 960RPM (optional variable speed drive available).

 

Tags. , , ,